How to descale your Dedica Pump Coffee Maker EC680 and EC685

descale the appliance .

When the orange light on the button comes on , you should use Delo Descaling only using unsuitable scalar and performing descaling incorrectly may result in faults not covered by the manufacturer's guarantee .

To descale the machine , fill the tank with the descaling solution , diluting with water .

Following the instructions on the pack , press the on off button .

Make sure the philtre holder is not attached and position a container under the cappuccino maker .

Wait for the one and two cup lights to come on steadily indicating that the appliance is ready for use .

Press and hold the steam button for 10 seconds until the three buttons flash in sequence .

Turn the steam dial to the steam position .

Press the button to start descaling .

The D scale programme starts and the descaling liquid comes out of the water spout .

The deca programme removes lime scale deposits from inside the appliance by automatically performing a series of rinses and pauses until the tank is completely empty .

During descaling .

To clean the boiler outlet , close the steam dial from time to time to deliver small quantities of descaling from the boiler outlet , the appliance stops operation and the Orange light continues to flash , indicating that descaling is still underway .

The coffee maker is now ready for rinsing through with clean water .

Extract the water tank empty rinse under running water .

Fill with fresh water up to the maximum level and put back in the appliance empty .

The container used to collect the scalar solution and replace it empty under the hot water spout .

Make sure the steam dial is in the steam position , then press the button to start rinsing .

Important descaling solutions contain ingredients which may irritate the skin and eyes .

The manufacturer's instructions given on the Scalar pack must be followed at all times .