Hey , everyone and welcome to the club today .
I'll be showing you how to draw a very simple Bumblebee from the Transformers .
I'm gonna get started in the center of a page with the eyes .
So I'm gonna start on the left side and draw a large circle starting from the very top .
I'll work my way around counter clockwise .
Now , I'm gonna draw a smaller circle on the inside and leave an even gap all the way around .
So again , I'm gonna start at the very top and then one more time , I'm gonna draw a smaller circle and just leave a little even band all the way around .
And I'm gonna go to color the center circle in black and they're gonna color the outside ring in black as well .
Now , from here , I'm gonna draw the inner edge of the helmet .
So in the center here , I'm gonna draw a straight line going across , leaving a gap on either side .
Now I'm gonna curb around the eye and then down along the side .
Now from the ends here , it's gonna curse slightly around the eye and then just come down on the inside .
From here , I'm gonna go straight in an angle coming in .
So doing a hard turn coming in and then from these points , I'm gonna just draw a short line coming down .
Let's take these ends and just draw a little bubbled chin here .
So from these points , I'm just gonna draw a short angle line coming down in and they gonna close off the bottom with a straight line .
Let's add a little bit of detail to the face .
So in the middle right here , I'm just gonna draw a circle , get start from the top or counter clockwise .
Now in the middle , I just want to draw a straight line coming down and leave a little space above the circle from here .
I'm gonna go out with the angle around the circle to the side .
We'll do the same thing on the right hand .
I'm gonna come down with a short line .
I'm gonna come in with a slight angle , just fall on that same angle here to worry about here because I want to close off this gap by connecting this corner with the end of the line .
We'll do the same thing on the right now from these two corners .
I just wanna curve up around the eye and just tuck it in underneath the center line here .
We're gonna leave a little overlap on the side .
Starting from the left corner , we'll curve up then underneath that little line .
Ok .
So now we got the face , Let's work our way around the helmet .
So we're starting the center here again , stepping up , draw short line , going across and go out at an angle .
And I'm gonna close off the top with a straight line from these two points .
I wanna draw two angle lines coming in towards each other towards the top of the head .
So from here , I'm just gonna go up with a light angle going up and do the same thing on the right side and it will close off the top with a straight line .
Now , we can draw in the side of the helmet .
So for this point , I want to step down and curve around the eye and then down to the jaw .
So if you step down , I'm gonna curve out around the eye .
I'm just gonna start to pull it in to right above there .
We'll do the same thing on the right .
So lining up the top around , around the eye and we'll start to pull it into right there .
Now , from these two points , I wanna curve in towards this little point here , cur you down and then up , we're gonna add two circle details up here .
So right at the top of the circle , I'm gonna draw a smaller circle on the inside .
Let's go to the right and do the same thing .
So we're in line at the top and we'll draw a smaller circle on the inside .
Now , I'm just gonna simplify the little horns on the side here .
So just above the circle on the side of the head , I'm just gonna curve around and up and I pull that back down .
Now , we're going to connect those two points with the curve .
Let's add the bow tie below the chin .
So we start on the left side and draw like a half circle going around .
Now , on the bottom , we're gonna draw two curves coming down and then out to the left and then one coming down and out towards the right on the top .
We're gonna curve in the opposite direction going across and then down .
Now we're gonna connect the top and the bottom with a curve going out and in .
Now , on the side of this half circle , I'm just gonna draw a little curve for the wrinkle in the bow tie on the side of the bow tie .
I wanna draw two curves coming in and then back out for the socket of the arms start on the left going out on the right side of the bow tie .
We're gonna curve down and then out .
Now we're gonna round out the hands and then come back up underneath the chin .
So taper it a little bit wider as you come down , do the same thing on the right .
So lining up the inside edge , curving up and we'll curve that back down towards the side of the head .
Now inside the horn , I just wanna add a little detail starting on the outside .
I just want to curve towards the inside .
Let's add a little detail in the centerpiece here .
So I'm just gonna trace this outer edge on the inside , leaving even space gap all the way around and then along the top just to make it look like it's sunken in and then step down , just draw a straight line .
Now , let's go to the side of the head and drawing the little fence .
So in line with the eyes , we're gonna step up to the outside and draw a short line and going out , gonna go straight down .
Now , I'm gonna curve this in just above that point in the jaw .
Now , let's just trim this out .
So we're just gonna fall that si three sides on the inside and then on the inside , I'm just gonna draw a series of horizontal lines .
We'll just draw three lines going across .
Now from the top corner here , I'm just gonna draw the angle line going in behind the head .
OK ?
Now that we got the head , let's work our way down the body .
So I'm gonna start with the upper chest first .
So we're gonna start with a straight line going across from left to right , just underneath that chin from here .
I'm just gonna draw two angle lines going up , aiming towards that little point here from these corners .