Set up your NESCAFÉ® Dolce Gusto® Infinissima coffee machine by Krups®

Hello .

In this video , we will show you how to set up your Delte Gusto in first plug in in check that the lever is on the stop position .

Switch on the machine .

While in warms up the power button blinks red for about 40 seconds .

When the machine is ready , the power button turns green to save energy .

In turns off .

After five minutes of not being used , first , remove the water tank , rinse it with drinking water , then fill it with drinking water and reinsert it .

Take the rinsing tool .

It helps drive the water flow during the rinsing process if you don't have it .

Don't worry , you can still rinse in reinsert the capsule holder .

Push down the locking handle , use a container to collect the water .

Move the lever to the cold position in .

We start rinsing , wait until the water tank is half empty .

Then move the lever back to the stop position to stop the flow .

Once the water flow has stopped , the power button blinks red .

Don't lift the locking handle at this moment .

When the power button turns green , move the lever to the hot position .

Wait until the water tank has emptied , then move the lever back to the stop position to stop the flow .

Once the water flow has stopped , the power button blinks red .

Don't lift the locking handle at this moment .

Remove the container , remove the rinsing tool and keep it for future use .

Reinsert the capsule holder .

You can adjust the drip tray .

There's a low position for large cups , a middle position for medium cups and a high position for small cups .

Thank you for watching .

Now , you can enjoy making great coffees with your in .