How to tie a globe knot

Hey there , I'm back .

Let's take a look at the Globe knot .

The globe knot is not commonly used to cover spherical objects such as golf balls , marbles , ball bearings , things like that .

There are many types of Globe Knots which differ in the number of faces or crossings that they have .

Generally .

The more crossings .

A globe knot has the larger object it can cover .

I've recently used the Globe knot to make a paracort tarantula .

I've used it to make the back of the spider to tie this .

Not , you're going to need some para cord , a core .

I'm going to use a marble and a PV C pipe or a manual in order to tie the knot onto .

I usually start at the halfway of my court and I wrap it around the man four times leaving court at both ends because you're going to need it to weave the knot .

We're going to take the right end and go over under , over , under until we reach the left side .

Then just pull the cord through to the left , take your right cord and go under over under at the cord until you reach the right end like this at this point , you have the basic starting position , which we're going to use to weave this knot .

First thing we're going to do is take our left end and double up the court at the bottom .

We're then going to take our right end , the top one and double up the cord at the top .

When we've done that spread apart to the top chords because we're going to split them using our right cord .

So take the right end and go under over , under , over until you reach the left , spread apart the bottom two cords and we're going to split them using our left hand .

I'm going to start by inserting the cord under the first cord , then go over under , over under until we reach the other side .

So over , under , over and over .

The last thing we need to do now is go to the top of the knot and you can see there's some space in between the two cords , the top one and the bottom one .

And we're going to split them as well by going under , over under , over .

At this point , you have both cords on your left side and you can remove the knot from your mand and insert your , your core and then tighten the knot around the core .

I've tightened up the cord around the core and you can see that it's a bit too loose .

You can use a lacing needle and some power cord to double up the knot .

If there are too many spaces around the knot left , I'm going to show you another way that you can use to make this double core .

No , not which is to use two chords to rap and we do not .