The Balthus is as large as neck tie knots come due to the sheer size of the knot .
The finished tie will be very short when completed .
Begin with the wide end of the tie on your left and the narrow end on your right , the back side facing outward , the narrow end should rest much higher than most traditional knots .
Start by crossing the wide end under the narrow end to your right and bring it up towards the neck loop down through the neck loop and to your left again , up to the center towards the neck loop down through the neck loop .
This time to your right up to the center towards the neck loop down through the neck loop to your left .
Now bring it across the front of the narrow end to your right and up through the neck loop from underneath and down through the loop you've just made on the front , pull down on the white end to Titan slide the knot up and adjust